Gefen GEF-HDMI1.3-2-3GSDI User Manual

www.gefenPRO.comHDMI 1.3 to 3G-SDI Converter User ManualGEF-HDMI1.3-2-3GSDI1080P

71 HDCP LED IndicatorThis LED indicator will relay the status of the incoming HDMI’s HDCP status. Options are either HDCP encrypted (LED ON) or No HD

8How to Connect the HDMI to 3GSDI Converter1. Connect the HDMI 1.3 source to the HDMI input of the HDMI to 3GSDI Converter using the supplied HDMI ca

9DIP SWITCH FEATURESThe DIP switch feature panel is located on the underside of the HDMI to 3GSDI Converter. Please use the diagram and chart below to

10Maximum input resolution (HDMI)... 2K (2048x1080p)Maximum output resolution (SDI)...

11

20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefenPRO.com [email protected] A1

ASKING FOR ASSISTANCERev A1Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM

CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Bottom Panel Layout7 Bottom Panel Descriptions8 Connecting And

1Congratulations on your purchase of the GefenPRO HDMI 1.3 to 3GSDI Converter. Your complete satisfaction is very important to us.GefenGefen delivers

2READ THESE NOTES BEFORE INSTALLING OROPERATING THE GEFENPRO HDMI 1.3 TO 3GSDI CONVERTER• The Converter is compliant to SD/HD SDI SMPTE 292M, SMPTE 2

3Features• The Converter is plug and play. Additional confi guration is available via built-in bank of DIP switches underneath the unit• Firmware is

4Front PanelBack Panel1425 6 7 839PANEL LAYOUT

51 Video Lock LED IndicatorThis indicator will become active once the HDMI input signal has been locked.2 3G LED IndicatorThis indicator will become

6Bottom Panel5412 3BOTTOM PANEL LAYOUT