®4x1 DVI DL SwitcherEXT-DVI-441DLUser Manualwww.gefen.com
7 4X1 DVI DL SWITCHER REMOTE DESCRIPTIONInput SelectionButtonsThe RMT-4IR remote control will allow the user to select which of 4 DVI sources will be
8 4X1 DVI DL SWITCHER REMOTE INSTALLATIONTo use the RMT-4IR remote, remove the battery cover on the back of the remote to reveal the battery compartme
94X1 REMOTE CONTROL AND SWITCHER CONFIGURATIONHow to Resolve IR Code Confl ictsIn the event that IR commands from other remote controls confl ict with t
10EDID MODESWhat is EDID and what is it used for?Under normal circumstances, an audio/video source device (digital or analog) will require information
11EDID MODES1234EDID ModesThe diagram below illustrates the 4-position DIP switch bank (containing 4 small white toggle switches as shown). The functi
12DL (Dual Link) Only ModesThe 8-position DIP switch bank located on the underside of the 4x1 DVI DL Switcher can be used to set each individual input
13RS-232 SERIAL CONTROL INTERFACEWhat features are available via the RS-232 serial communications port?The 4x1 DVI DL Switcher can accept commands thr
14RS-232 SERIAL CONTROL COMMANDSRS-232 FeaturesRS-232 remote functions are used to control of this product’s features. Features include input to outpu
15RS-232 SERIAL CONTROL COMMANDS#EDIDDSTOLO FunctionThe #EDIDDSTOLO function reads the downstream EDID and stores into all lo-cal inputs.Syntax:#EDIDD
16RS-232 SERIAL CONTROL COMMANDS#DDCTODS FunctionThe #DDCTODS function routes the input DDC to the downstream EDID (pass-through mode).Syntax:#DDCTODS
ASKING FOR ASSISTANCETechnical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM Monda
17RS-232 SERIAL CONTROL COMMANDS#LOEDIDTOBA FunctionThe #LOEDIDTOBA function loads the specifi ed EDID fi le and stores it in a specifi ed EDID bank.Synt
18RS-232 SERIAL CONTROL COMMANDS#LOEDIDTOLO FunctionThe #LOEDIDTOLO function loads the specifi ed EDID fi le to a specifi ed local input.Syntax:#LOEDIDTO
19RS-232 SERIAL CONTROL COMMANDS#PRDSEDID FunctionThe #PRDSEDID function reads the downstream EDID and sends it to the serial port.Syntax:#PRDSEDID pa
20RS-232 SERIAL CONTROL COMMANDSCommandsSimplifi ed syntax was used for command implementation for faster operation with the device: # character – isn’
RS-232 SERIAL CONTROL COMMANDS2. USING SHORT-CUT CHARACTERS TO CHANGE SETTINGS2.1 HYPERTERMINALtm SETTINGS in Microsoft WindowstmFirst, please setup c
22RACK MOUNT INSTALLATIONRear of unitFront of unitRack mount ears are provided for installation of this unit into a 1U rack mount space.1. Locate the
SPECIFICATIONS23Video Amplifi er Bandwidth:...2 x 165 MHzInput Video Signal:...
24WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects
25NOTES
26NOTES
CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Connecting and Operating The 4x1 DVI DL Switcher7
NOTES
20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] A10PbThis product uses
1INTRODUCTIONCongratulations on your purchase of the 4x1 DVI DL Switcher. Your complete satisfaction is very important to us.GefenGefen delivers innov
OPERATION NOTES2READ THESE NOTES BEFORE INSTALLING OROPERATING THE GEFEN 4X1 DVI DL SWITCHER• The 4x1 DVI DL Switcher will take any of up to four (4)
3FEATURESFeatures• Switches easily between any four DVI-SL or DVI DL sources• Maintains highest resolution dual link DVI • Supports resolutions up
4PANEL LAYOUTBack PanelFront Panel689754213
5PANEL DESCRIPTIONS1 External IR PortFor connection of external IR extension device such as the Gefen IR Extender (part # EXT-RMT-EXTIR).2 IR Receive
6CONNECTING AND OPERATING THE 4X1 DVI DL SWITCHERHow to Connect the 4x1 DVI DL Switcher to your devices:1. Connect user supplied DVI cables from the
Comments to this Manuals