Gefen EXT-HDMI1.3-841 User Manual

®8x1 Switcher for 1.3EXT-HDMI1.3-841User Manualwww.gefen.com

7The included RMT-8IR remote control is used to switch between inputs on the 8x1 Switcher for HDMI 1.3. Only one input can be selected at a time and t

8Why would I need to change the remote channel?In some instances, the 8x1 Switcher for HDMI 1.3 may use IR codes that confl ict with other IR remote co

9RS-232 SERIAL COMMUNICATIONWhat features are available via the RS-232 serial communications port?The 8x1 Switcher for HDMI 1.3 can accept commands th

10Video Amplifi er Bandwidth ... 225 MHz Input Video Signal ...

11WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] A4PbThis product uses

ASKING FOR ASSISTANCERev A4Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM

CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Connecting And Operating The 8x1 Switcher For HDMI 1.37 RMT8-IR

1Congratulations on your purchase of the 8x1 Switcher for HDMI 1.3. Your complete satisfaction is very important to us.GefenGefen delivers innovative,

READ THESE NOTES BEFORE INSTALLING OROPERATING THE 8X1 SWITCHER FOR HDMI 1.3• This devices is HDMI 1.3 compliant. Please see page 3 for supported HDM

3Features• Switch easily between any eight HDMI sources• Extends the range of HDMI compliant devices by equalizing and reclocking the HDMI signal•

4Front PanelBack Panel12 436 875PANEL LAYOUT

51 Infrared (IR) Receiver Extension PortThis port will accept an optionally purchased IR extension cable (Gefen part# EXT-RMT-EXTIR). This is useful

6How to Connect the 8x1 Switcher for HDMI 1.31. Connect up to eight HDMI source devices to the 8x1 Switcher for HDMI 1.3 using the supplied HDMI cabl