Gefen EXT-DVIKVM-441DL User Manual download pdf (Page 12)

RMT-4IR REMOTE AND 4X1 KVM SWITCHER CONFIGURATION

How to Resolve IR Code Conﬂ icts

In the event that IR commands from other remote controls conﬂ ict with the

supplied RMT-4IR remote control, changing the remote channel will alleviate this

issue. The RMT-4IR remote control and the 4x1 DVI KVM DL/SL Switcher both

have banks of DIP (Dual Inline Package) Switches for conﬁ guring the remote

channel that both units use to communicate. These settings must exactly match

each other for proper operation.

The DIP Switch bank on the RMT-4IR is located underneath the battery cover.

DIP Switch banks for the 4x1 DVI KVM DL/SL Switcher are located on the

underside of the unit beneath a black piece of metallic tape. One DIP switch

bank (4-switch) is for the adjustment of remote control frequencies and switch

behavior. The other DIP switch (8-switch) is reserved for DL Only mode (page

12). Switches 1 and 2 on the RMT-4IR directly correspond to DIP Switches 1 and

2 on the 4x1 DVI KVM DL/SL Switcher. Only switches 1 and 2 (of 4 in that bank)

are used for IR Code settings.

Remote Channel 1:

Default

1 2

Remote Channel 2:

1 2

Remote Channel 3:

1 2

Remote Channel 4:

1 2

Left: Picture of the opened rear battery

compartment of the RMT-4IR remote showing

the exposed DIP Switch bank between the

battery chambers.

4x1 DVI KVM DL/SL Switcher

Remote Channel 1:

Default

Remote Channel 4:

Remote Channel 3:

Remote Channel 2:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

No comments

Gefen EXT-DVIKVM-441DL User Manual Page 12