Gefen EXT-HDMI1.3-242 User Manual download pdf (Page 8)

PANEL DESCRIPTIONS

1 Power LED Indicator

This LED will become active once the included 5V DC power supply is properly

connected between the unit and a open wall power receptacle.

2 IR (Infrared) Receiver

This receiver will accept command for switching between input HDMI devices

using the included RMT-2IR remote control.

3 Internal EDID Mode LED Indicator

This LED will become active when the unit is using the pre-loaded EDID. See

page 11 for more details.

4 External EDID Mode LED Indicator

This LED will become active when the unit is using the EDID from the HDMI

deice connected to HDMI output port 1. See page 6 for more details.

5 Link LED Indicator

This LED will become active when the unit is properly connected to an HDMI

capable device on either of the HDMI output ports.

6 Input LED Indicators

There is one LED for each of the four input ports. The LED for the currently

selected HDMI input will be active.

7 EDID Button

This button will toggle between the internal external EDID modes. To determine

which mode is currently being used, please note which EDID mode LED is

active on the front panel of the unit.

8 Reset Button

This button will reset the unit and force all devices in the chain to re-transmit/

re-read EDID. It is essential that the unit be reset after the EDID mode has been

changed.

9 HDMI Input Ports 1-2

Connect up to 2 HDMI source devices to these HDMI input ports. Selection

between these inputs are made using the included RMT-2IR remote control.

10 HDMI Output Ports 1-2

Connect up to 4 HDMI capable devices to these HDMI output ports. The

currently selected HDMI input source device will be output through all of these

HDMI output ports.

11 5V DC Power Input Port

Connect the included 5V DC power supply between this port and an open wall

power receptacle.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Gefen EXT-HDMI1.3-242 User Manual Page 8