Gefen EXT-DP-841 Specifications

®

7BACK PANEL DESCRIPTIONS1 5V DCConnect the included 5V DC locking power supply to this receptacle.2 In 1 - In 8Each of these ports will accept a stand

IR REMOTE CONTROL UNIT821Activity IndicatorThis LED will be activated momentarily each time a button is pressed.2 Source Selection Buttons (1 - 8)Thes

IR REMOTE CONTROL UNIT9Installing the RMT-8IR Battery1.Remove the battery cover on the back of the IR Remote Control Unit.2. Insert the included batt

IR REMOTE CONTROL UNIT10IR Channel 0(default)1 2ONCorresponding DIP Switch Settings for each IR ChannelIt is important that the IR channel on the

CONNECTING THE 8X1 DISPLAYPORT SWITCHER11How to Connect the 8x1 DisplayPort Switcher1Connect up to eight (8) DisplayPort source devices to the Display

OPERATING THE 8X1 DISPLAYPORT SWITCHER12Front Panel Buttons and LED IndicatorsThe front panel of the 8x1 DisplayPort Switcher has a set of eight (8) L

13OPERATING THE 8X1 DISPLAYPORT SWITCHERSwitching sources using RS-232Confi gure the Switch for use with RS-232 (see page 14 for details).Example: Swit

RS-232 CONTROL14Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A null-modem adapter should not be used with this prod

RS-232 COMMANDS15Command SyntaxAll RS-232 commands are case-sensitive and must be entered in lowercase. Each command must be preceded by the ‘#’ char

16RS-232 COMMANDS#GET_USER_NAME CommandThe #GET_USER_NAME command prompts for the Telnet username.Syntaxy:#get_user_nameParameters:None#IPCONFIG Comma

Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM Monday thru Friday.Write T

17RS-232 COMMANDS#SET_HTTP_PORT CommandThe #SET_HTTP_PORT command sets the Web server listening port.Syntaxy:#set_http_port param1Parameters:param1

18RS-232 COMMANDS#SET_USER_NAME CommandThe #SET_USER_NAME command sets the Telnet user name.Syntaxy:#set_user_name param1Parameters:param1 StringNote

19RS-232 COMMANDS#SIPADD CommandThe #SIPADD command specifi es a new IP address. Dot-decimal notation must be used when specifying the IP address. A

20RS-232 COMMANDS#USE_TELNET_PASS CommandThe #USE_TELNET_PASS command enables / disabled the use of a Telnetpassword during the login process.Syntaxy:

21RS-232 COMMANDS#FADEFAULT FunctionThe #FADEFAULT function will reset the Switcher to the default routing settings.Syntaxy:#fadefaultParameters:None#

22RS-232 COMMANDS#LOCKPOWER CommandThe #LOCKPOWER enables/disables the power lock state. Enabling thisfeature will store the 5V status for each input

23Routing and Extender CommandsThe following commands do not require the ‘#’ character. A carriage return must tbe added to the end of each command.C

24TELNET CONTROLThe Gefen 8x1 DisplayPort Switcher supports Telnet for controlling the Switcher over a network. To access this feature, an IP address

25TELNET CONTROL5. Use the#sipadd command to set the IP address for the Control System. Check with a network administrator to obtain an available add

26SPECIFICATIONSMaximum Pixel Clock...360 MHzInput Connector...

CONTENTS1 Introduction2 Operation Notes3 Features4 Front Panel Layout5 Front Panel Descriptions6 Back Panel Layout7 Back Panel Descriptions8 IR Re

27WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

Rev A1PbThis product uses UL listed power supplies.

1INTRODUCTIONCongratulations on your purchase of the 8x1 DisplayPort Switcher. Your completesatisfaction is very important to us.GefenGefen is a uniqu

READ THESE NOTES BEFORE INSTALLING OROPERATING THE 8X1 DISPLAYPORT SWITCHER• The 8x1 DisplayPort Switcher supports Pass-through EDID. The Switcher wi

3FEATURESFeatures•Switches a single Hi-Def display between eight DisplayPort-equipped sources.• Supports HD resolutions up to 1080p Full HD• Supports

4FRONT PANEL LAYOUTFront Panel4213

5FRONT PANEL DESCRIPTIONS1 Input Indicators (1 - 8)Each of these LED indicators glows bright blue according to the input selection(seeInput Butto

6BACK PANEL LAYOUTBack Panel623541