®A/V ConferenceRoom ProcessorEXT-AVCONFSUser Manualwww.gefen.com
7BACK PANEL DESCRIPTIONS1 HDMI OutputConnect an HDMI cable from the A/V Conference Room Processor to an HDTV display.2 Analog L/R (RCA) InputConnect
8FRONT PANEL BUTTON LAYOUTThe A/V Conference Room Processor uses a series of push buttons, located on the front panel, for all input selection and fea
9FRONT PANEL BUTTON DESCRIPTIONS1 Left Cursor ButtonThis button is used to navigate the Menu System and change settings by moving the cursor to the l
10IR REMOTE CONTROL LAYOUT32145615171110141398712161 Mute ButtonEnables / disables muting of the audio output signal.2 Video Format ButtonCycles thro
11IR REMOTE CONTROL DESCRIPTIONS7 Audio Input ButtonCycles between the available audio inputs for the selected video input.8 PC VGASelects the VGA vi
12INSTALLING THE IR REMOTE CONTROL UNITInstalling the Battery1. Remove the battery cover on the back of the IR Remote Control unit.2. Insert the inc
13IR REMOTE CONTROL UNIT CONFIGURATIONSetting the IR Remote Control ChannelIn the event that IR commands from other remote controls interfere with the
14CONNECTING THE A/V CONFERENCE ROOM PROCESSORHow to Connect the A/V Conference Room Processor1. Connect video source devices to the A/V Conference R
15CONNECTING THE A/V CONFERENCE ROOM PROCESSORRS-232 ControllerRS 232 C t llEXT-AVCONFSDIGITAL AUDIO (TOSLINK) CABLE SUBWOOFER AUDIO (RCA) CABLE DIGIT
16FRONT PANELStatus ScreenThe Status Screen displays information regarding the current settings of the Audio Processor. The Status Screen is also use
ASKING FOR ASSISTANCERev A1Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM
17FRONT PANELEnable / disable mutingAdjusting the VolumeUse the Up Button and Down Button to increase or decrease the audio gain in the Status Screen.
18FRONT PANELFirmware VersionTo display the fi rmware version of the A/V Conference Room Processor, press either the ◄ or ► buttons on the front panel:
19MENU SYSTEMVideo MenuTo access the Video Menu, press the Menu button on the front panel.Use the ▼ or ▲ buttons to highlight the Video Menu icon. Pr
20MENU SYSTEMScaleSets the scaling adjustment. Options are: Full, Overscan, Underscan, Letterbox U.S. (Underscan), PanScan U.S. (Underscan), Letterbo
21MENU SYSTEMColor MenuTo access the Output Menu, press the Menu button. Use the ▼ or ▲ buttons to highlight the Output Menu icon. Press the Menu bu
22MENU SYSTEMOutput MenuTo access the Output Menu, press the Menu button. Use the ▼ or ▲ buttons to highlight the Output Menu icon. Press the Menu b
23MENU SYSTEMOSD MenuTo access the OSD Menu, press the Menu button. Use the ▼ or ▲ buttons to highlight the OSD Menu icon. Press the Menu button to
24MENU SYSTEMAudio MenuTo access the Audio Menu, press the Menu button. Use the ▼ or ▲ buttons to highlight the Audio Menu icon. Press the Menu butt
25MENU SYSTEMSpeakers MenuTo access the Speakers Menu, press the Menu button. Use the ▼ or ▲buttons to highlight the Speakers Menu icon. Press the M
26MENU SYSTEMLevel SubSets the offset volume level for the left speaker. Minimum value: +0 dB, Maximum value: +10 dBExitExits the Speaker Menu and re
CONTENTS1 Introduction2 Operation Notes3 Features4 Front Panel Layout5 Front Panel Descriptions6 Back Panel Layout7 Back Panel Descriptions8
27RS-232 SERIAL COMMANDSRS232 SettingsBits per second ... 192
28RS-232 SERIAL COMMANDSCommand SyntaxThe syntax for each command is as follows:CommandName [space] param1 [space] param2...paramN \rThe command synta
29RS-232 SERIAL COMMANDSAENHNCE CommandThe AENHNCE command improves the speech intelligibility.Syntax:AENHNCE param1Parameters:param1 ModeMode Mea
30RS-232 SERIAL COMMANDSBASS CommandThe BASS command sets the bass level.Syntax:BASS param1Parameters:param1 Level [-12 ...12]Notes:The + or - c
31RS-232 SERIAL COMMANDSDFR CommandThe DFL command sets the distance of the Front Right speaker.Syntax:DFR param1Parameters:param1 Level [0 ...1
32RS-232 SERIAL COMMANDSDSB CommandThe DSB sets the distance of the Subwoofer.Syntax:DSB param1Parameters:param1 Level [0 ...10]Notes:The + or -
33RS-232 SERIAL COMMANDSLFV CommandThe LFV command sets the Front Left speaker volume.Syntax:LFV param1Parameters:param1 Level [-10...10]Notes:T
34RS-232 SERIAL COMMANDSRTV CommandThe RTV command sets the Front Right speaker volume.Syntax:RTV param1Parameters:param1 Level [-10...10]Notes:
35RS-232 SERIAL COMMANDSSUBV CommandThe SUBV command sets the subwoofer volume.Syntax:SUBV param1Parameters:param1 Level [-10...10]Notes:The + o
36RS-232 SERIAL COMMANDSTREB CommandThe TREB command sets the treble subwoofer volume.Syntax:TREB param1Parameters:param1 Level [-12...12]Notes:
1Congratulations on your purchase of the A/V Conference Room Processor. Your complete satisfaction is very important to us.GefenGefen delivers innovat
37General CommandsCommand DescriptionIR Sets the IR channelOSDHPOS Sets the horizontal position of the OSDOSDVPOS Sets the vertical position of the OS
38OSDVPOS CommandThe OSDVPOS command sets the vertical position of the OSD.Syntax:OSDVPOS param1Parameters:param1 VPos [0...100]Notes:Use ? for
39RS-232 SERIAL COMMANDSVideo CommandsCommand DescriptionBLUE Set the blue color component valueBRTNESS Sets the brightness valueCLRTMP Sets the color
40RS-232 SERIAL COMMANDSBRTNESS CommandThe BRTNESS sets the brightness level of the output.Syntax:BRTNESS param1Parameters:param1 Value [0...100
41RS-232 SERIAL COMMANDSCONTRST CommandThe CONTRST sets the contrast level on the output signal.Syntax:CONTRST param1Parameters:param1 Value [0.
42RS-232 SERIAL COMMANDSHUE CommandThe HUE sets the color hue level.Syntax:HUE param1Parameters:param1 Value [0...100]Notes:The + or - character
43RS-232 SERIAL COMMANDSOUT CommandThe OUT command sets the output resolution.Syntax:OUT param1Parameters:param1 ResolutionResolution Meaningnativ
44RS-232 SERIAL COMMANDSPCHPOS CommandThe PCHPOS command sets the horizontal position of the output signal on the display.Syntax:PCHPOS param1Paramete
45RS-232 SERIAL COMMANDSPMODE CommandThe PMODE command loads a predefi ned color and brightness calibration which is applied to the output signal.Synta
46RS-232 SERIAL COMMANDSSATURTN CommandThe SATURTN command sets the saturation level of the output signal.Syntax:SATURTN param1Parameters:param1 V
2OPERATION NOTESPLEASE READ THESE NOTES BEFORE INSTALLING OROPERATING THE A/V CONFERENCE ROOM PROCESSOR• The A/V Conference Room Processor has three
47RS-232 SERIAL COMMANDSSIZE CommandThe SIZE command sets the saturation level of the output signal.Syntax:SIZE param1Parameters:param1 SizeSize M
48MAIN MENU SYSTEM SUMMARY▲▲▲▲▲▲Exit▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲ExitExitExitMenuExitExit▲▲
49VIDEO MENU SUMMARY▲▲▲▲▲▲▲▲▲▲▲▲Min: 0Max: 100Status ScreenStandardMovieVividUser▲▲▲▲▲▲▲▲▲▲Min: 0Max: 100ExitExitExitExit▲▲▲▲
50VIDEO MENU SUMMARY▲▲▲▲▲▲▲▲Min: 0Max: 100Min: 0Max: 100▲▲▲▲▲▲▲▲▲▲Min: 0Max: 100ExitExitExit▲▲▲▲▲▲
51VIDEO MENU SUMMARY▲▲▲▲▲▲FullOverscanUnderscanLetterboxUSPanScan U.S.Letterbox FullPanScan FullExit▲▲▲▲▲▲▲▲ExitExitHDMIDVI1DVI2PCCOMP1COMP2▲▲▲▲▲▲
52COLOR MENU SUMMARY▲▲▲▲▲▲▲▲▲▲▲▲Min: 0Max: 100Status ScreenUserNormalWarmCool▲▲▲▲▲▲▲▲▲▲Min: 0Max: 100ExitExitExitExit▲▲▲▲
53COLOR MENU SUMMARYMin: 0Max: 100▲▲▲▲▲▲▲▲ExitExit▲▲▲▲
54OUTPUT MENU SUMMARY▲▲▲▲▲▲Status ScreenVGAUXGA1080i60576pSVGA480iNATIVE1080p60720p50XGA480p1080p-21080i501080p-31080p-1WUXGASXGA720p60576i1080p50WSXG
55OSD MENU SUMMARY▲▲▲▲Status ScreenMin: 0Min: 0Max: 100Max: 100▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲▲▲
56OSD MENU SUMMARYMin: 0Min: 013Max: 100Max: 10024▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲
3FEATURESFeatures• Scales and outputs resolutions up to 1080p, 2K, and 1920x1200• Switches and converts various A/V sources to HDMI• Dolby Digital™
57OSD MENU SUMMARYExit▲▲▲▲
58AUDIO MENU SUMMARY▲▲▲▲▲▲▲▲▲▲▲▲TOSLINKAnalogStatus ScreenTOSLINKTOSLINKAnalogAnalogSPDIFSPDIFSPDIF▲▲▲▲▲▲▲▲▲▲ExitExitExitExit▲▲▲▲
59AUDIO MENU SUMMARY▲▲▲▲▲▲TOSLINKS/PDIFMin: -12DBMax: +12DBAnalogAnalogS/PDIF▲▲▲▲▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲
60AUDIO MENU SUMMARY▲▲▲▲▲▲Min: -12 dBMax: +12 dBOnVolumeNightOffVoiceOff▲▲▲▲▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲
61AUDIO MENU SUMMARY▲▲▲▲▲▲Off110 ms40 ms150 msOnMute▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲
62SPEAKER MENU SUMMARY▲▲▲▲▲▲▲▲▲▲▲▲OnOffStatus ScreenLarge50 HzSmall60 Hz90 Hz▲▲▲▲▲▲▲▲▲▲ExitExitExitExit▲▲▲▲
63SPEAKER MENU SUMMARY▲▲▲▲▲▲Pre-AmpFixedMin: 0 mMin: 0 mMax: 10 mMax: 10 m▲▲▲▲▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲
64SPEAKER MENU SUMMARY▲▲▲▲▲▲Min: 0 mMax: 10 mMin: -10 dBMin: -10 dBMax: +10 dBMax: +10 dB▲▲▲▲▲▲▲▲▲▲▲▲ExitExitExit▲▲▲▲▲▲
65SPEAKER MENU SUMMARYExit▲▲▲▲
66MOUNTING PLATE INSTALLATIONRear of unitFront of unitRack mount ears are provided for installation of this unit into a 2U rack mount space.1. Locate
4FRONT PANEL LAYOUTFront 119763211085412 13 1415
67Maximum Pixel Clock...165 MHzAnalog Video Bandwidth...
WARRANTY68Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects
Rev A120600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] product uses
51 Analog L/R (RCA) InputConnect a L/R RCA stereo pair from the Component 1 source to this input.2 S/PDIF InputConnect a Coax cable, as part of the C
6BACK PANEL LAYOUT119721 85412136310Back
Comments to this Manuals