Gefen EXT-AVCONFS User Manual download pdf (Page 42)

RS-232 SERIAL COMMANDS

Video Commands

Command Description

BLUE Set the blue color component value

BRTNESS Sets the brightness value

CLRTMP Sets the color temperature

CONTRST Sets the contrast level

GREEN Sets the green color component value

HUE Sets the hue

NR Sets the noise reduction level

OUT Sets the output resolution

PCHPOS Adjusts the horizontal position of the output signal

PCVPOS Adjusts the vertical position of the output signal

PMODE Sets the picture mode

RED Sets the red color component value

SATURTN Sets the saturation level

SHARP Sets the sharpness level

SIZE Sets the picture mode

VIN Sets the video input source

BLUE Command

The BLUE command sets the blue color component value.

Syntax:

BLUE param1

Parameters:

param1 Value [0...100]

Notes:

The + or - character can also be used, in place of specifying a value, to increase

or decrease the color component value by intervals of 1.

Use ? for param1 to retrieve the current value.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

No comments

Gefen EXT-AVCONFS User Manual Page 42