page | 29
Updating the Firmware
7. Assign the following serial port settings in Hyperterminal:
Description Setting
Baud rate
19200
Data bits
8
Parity
None
Stop bits
1
Hardware ow control
None
8. Reconnect the power supply to the Sender (or Receiver) unit.
9. Type the following in the terminal application:
#fw_upgrade
10. Press the [ENTER] key.
11. When prompted, press 1 on the computer keyboard.
12. Click Transfer > Send File...
13. Select the rmware le: ELR_BIDIR_[version].bin.
14. Select the YModem protocol and click the Send button.
15. After the upgrade process is complete, the unit will automatically reboot.
16. Both the Sender and Receiver units are now updated.
Appendix
Comments to this Manuals