Gefen EXT-HDMI1.3-442 User Manual download pdf (Page 8)

PANEL DESCRIPTIONS

1 Power Indicator

This LED will become active once the included 5V DC power supply is properly

connected between the unit and a open wall power receptacle.

2 IR (Infrared) Receiver

This receiver will accept command for switching between input HDMI devices

using the included RMT-4IR remote control.

3 Internal EDID Mode Indicator

This LED will become active when the unit is using the pre-loaded EDID. See

page 11 for more details.

4 External EDID Mode Indicator

This LED will become active when the unit is using the EDID from the HDMI

deice connected to HDMI output port 1. See page 6 for more details.

5 Link Indicator

This LED will become active when the unit is properly connected to an HDMI

capable device on either of the HDMI output ports.

6 Input Indicators

There is one LED for each of the four input ports. The LED for the currently

selected HDMI input will be active.

7 S/PDIF Digital Audio Output Connector

This S/PDIF output will supply supported audio formats for output to an

external audio decoder or device such as an ampliﬁ er or receiver.

8 EDID Button

This button will toggle between the internal external EDID modes. To determine

which mode is currently being used, please note which EDID mode LED is

active on the front panel of the unit.

9 Reset Button

This button will reset the unit and force all devices in the chain to re-transmit/

re-read EDID. It is essential that the unit be reset after the EDID mode has been

changed.

10 HDMI Input Ports 1-4

Connect up to four (4) Hi-Def sources these HDMI input ports.

11 HDMI Output Ports 1-2

Connect up to two (2) HDTV displays to these HDMI output ports.

12 5V DC Power Receptacle

Connect the included 5V DC power supply between this port and an open wall

power receptacle.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Gefen EXT-HDMI1.3-442 User Manual Page 8