Gefen EXT-HDMI1.3-442 User Manual download pdf (Page 12)

IR REMOTE CONFIGURATION

Setting the IR Remote Channel on the RMT-8IR

In the event that IR commands from other remote controls conﬂ ict with the

supplied IR Remote Control Unit, changing the remote IR channel will ﬁ x this

issue. The IR Remote Control Unit has a bank of DIP switches for setting the

Remote IR channel.

The DIP Switch bank is located underneath the battery cover.

1 2

Remote Channel 3:

Remote Channel 1:

Default

Remote Channel 2:

Remote Channel 4:

Left: Picture of the opened rear battery

compartment of the IR Remote Control

Unit showing the exposed DIP Switch bank

between the battery chambers.

The IR channel selected on the IR Remote Control unit must match the IR

channel assigned to the 4x2 Switcher for HDMI 1.3. For example, if you set both

DIP switches on the remote to the down position (IR channel 1), you must set the

4x2 Switcher for HDMI 1.3 to use IR channel 1.

Refer to page 10 on how to change the IR channel on the 4x2 Switcher for HDMI

1.3.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Gefen EXT-HDMI1.3-442 User Manual Page 12