Gefen GTV-ETH-2COAX User Manual download pdf (Page 30)

FIRMWARE UPDATE PROCEDURE

The ﬁ rmware for the GefenTV Ethernet Over Coax can be updated by FTP,

TFTP, or a direct ﬁ le. The ﬁ rmware update can be executed from either the

ADVANCED CONFIGURATION PANEL, or the WEB UTILITY.

UPDATE VIA THE ADVANCED CONFIGURATION PANEL

Firmware updates can be accomplished from the General tab in the ADVANCED

CONFIGURATION PANEL. See page 19 for instructions on how to enter the

ADVANCED CONFIGURATION PANEL.

Upgrade Via FTP or TFTP

Select the update protocol. Either FTP or TFTP1.

Enter the server IP address2.

Enter the user name and password3.

Enter the name of the ﬁ le (if the ﬁ le is not in the root directory of the TFTP or 4.

FTP directory, you have to write the whole route from root server directory)

Select which section you would like to update (Firmware, Loader or Factory 5.

Settings)

Click on the ﬁ rmware update button6.

Upgrade Via File

Use the browse button to the right of the ﬁ rmware ﬁ le window and select the 1.

ﬁ rmware update ﬁ le. You can also manually type the full path to the ﬁ rmware

ﬁ le

Click on the upgrade ﬁ rmware button2.

NOTE: This procedure is the same using the web utility. The web update section

is located in the change conﬁ guration settings, which is accessible from the main

page.

1 2 ... 25 26 27 28 29 30 31

No comments

Gefen GTV-ETH-2COAX User Manual Page 30