Gefen EXT-DVI-841DL User Manual download pdf (Page 12)

RMT-8IR REMOTE AND 8X1 SWITCHER CONFIGURATION

How to Resolve IR Code Conﬂ icts

In the event that IR commands from other remote controls conﬂ ict with the

supplied RMT-8IR remote control, changing the remote control channel will

alleviate this issue. The RMT-8IR remote control and the 8x1 DVI DL/SL Switcher

both have banks of DIP (Dual Inline Package) Switches for conﬁ guring the

remote channel that the units use to communicate. These settings must exactly

match each other for proper operation.

The DIP Switch bank on the RMT-8IR is located underneath the battery cover.

DIP Switch banks for the 8x1 DVI DL/SL Switcher are located on the underside of

the unit beneath a black piece of metallic tape. One DIP switch bank (4-switch)

is for the adjustment of remote control frequencies and switch behavior. The

other DIP switch (8-switch) is reserved for Gefen use only. DIP Switches 1 and

2 on the RMT-8IR directly correspond to DIP Switches 1 and 2 on the 8x1 DVI

DL/SL Switcher. Only switches 1 and 2 (of 4 in that bank) are used for IR Code

settings.

Remote Channel 1:

Default

1 2

Remote Channel 2:

1 2

Remote Channel 3:

1 2

Remote Channel 4:

1 2

Left: Picture of the opened rear battery

compartment of the RMT8-IR remote showing

the exposed DIP Switch bank between the

battery chambers.

8x1 DVI DL/SL Switcher

Remote Channel 1:

Default

Remote Channel 4:

Remote Channel 3:

Remote Channel 2:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

No comments

Gefen EXT-DVI-841DL User Manual Page 12