EXT-VGAA-HD-SCUser ManualVGA & Audio to HDMIScaler/ConverterRelease A1*Preferred
page | 90Advanced OperationCommands#set_contrastSets the contrast of the output video signal.Syntax#set_contrast param1Parametersparam1 Contrast
page | 91Advanced OperationCommands#set_display_notifyEnables / disables the input/output resolution information dialog. When set to On, the input/ou
page | 92Advanced OperationCommands#set_edge_enhanceSets the picture edge enhancement (sharpness) threshold. The Mid and Max settings are sharpness p
page | 93Advanced OperationCommands#set_horizontal_mirrorEnables or disables horizontal mirroring. When set to on, the output image is ipped horizon
page | 94Advanced OperationCommands#set_horizontal_shiftAdjust the horizontal position of the output image.Syntax#set_horizontal_shift param1Parameter
page | 95Advanced OperationCommands#set_horz_activeSets the number of active horizontal pixels and saves it to the specied preset.Syntax#set_horz_act
page | 96Advanced OperationCommands#set_horz_back_porchSets the horizontal back porch and saves it to the specied preset.Syntax#set_horz_back_porch p
page | 97Advanced OperationCommands#set_horz_front_porchSets the horizontal front porch and saves it to the specied preset.Syntax#set_horz_front_porc
page | 98Advanced OperationCommands#set_horz_scan_rateSets the horizontal scan rate and saves it to the specied preset. param1 is a oating-point va
page | 99Advanced OperationCommands#set_horz_sync_polaritySets the horizontal sync polarity and saves it to the specied preset.Syntax#set_horiz_sync_
1 Getting StartedVGA & Audio to HDMIScaler/ConverterIntroduction...
page | 100Advanced OperationCommands#set_horz_sync_widthSets the horizontal sync width in pixels and saves it to the specied preset.Syntax#set_horz_s
page | 101Advanced OperationCommands#set_horz_totalSets the total number of horizontal pixels and saves it to the specied preset.Syntax#set_horz_tota
page | 102Advanced OperationCommands#set_hueSets the picture hue of the output video signal.Syntax#set_hue param1Parametersparam1 Hue [0 ... 10
page | 103Advanced OperationCommands#set_osd_timeoutSets the OSD (On-Screen Display) time-out delay in seconds. If param1 = 0, then the OSD timeout w
page | 104Advanced OperationCommands#set_output_colorSets the output color space.Syntax#set_output_color param1Parametersparam1 Color space [
page | 105Advanced OperationCommands#set_output_modeSets the output mode.Syntax#set_output_mode param1Parametersparam1 Mode [0 ... 2]param1 Des
page | 106Advanced OperationCommands#set_output_resSets the output resolution. Resolutions that use reduced-blanking are indicated with “(RB)”.Note t
page | 107Advanced OperationCommandsparam1 Description22SD (480i) / 60 Hz23SD (576i) / 50 Hz24SD (480p) / 60 Hz25SD (576p) / 50 Hz26HD (720p) / 60 Hz2
page | 108Advanced OperationCommands#set_phaseSets the phase adjustment. The default setting is “Auto”.Syntax#set_phase param1Parametersparam1 Ph
page | 109Advanced OperationCommands#set_pixel_clockSets the pixel clock and saves it to the specied preset. param1 is a oating-point value and can
page | 2Page TitleVGA & Audio to HDMIScaler/Converter®VGA In L/R In USB 12V DC PwrHDMI Out Up Dn MenuEXT-VGAA-HD-SCVGA & Audio to HDMIScaler/C
page | 110Advanced OperationCommands#set_saturationSets the picture saturation.Syntax#set_saturation param1Parametersparam1 Saturation [0 ...
page | 111Advanced OperationCommands#set_sharpnessSets the picture saturation. In order to set the sharpness value, the Edge Enhance setting must be
page | 112Advanced OperationCommands#set_test_patternsEnables / disables or sets the test pattern.Syntax#set_test_patterns param1Parametersparam1
page | 113Advanced OperationCommands#set_uo_scanAdjusts the underscan / overscan of the output image. The default value is 0. Negative values produc
page | 114Advanced OperationCommands#set_vert_activeSets the vertical active pixels and saves it to the specied preset.Syntax#set_vert_active param1
page | 115Advanced OperationCommands#set_vert_back_porchSets the vertical back porch and saves it to the specied preset.Syntax#set_vert_back_porch pa
page | 116Advanced OperationCommands#set_vert_front_porchSets the vertical front porch and saves it to the specied preset.Syntax#set_vert_front_porch
page | 117Advanced OperationCommands#set_vert_refresh_rateSets the vertical refresh rate and saves it to the specied preset. param1 is a oating-poi
page | 118Advanced OperationCommands#set_vert_sync_polaritySets the vertical sync polarity and saves it to the specied preset.Syntax#set_vert_sync_po
page | 119Advanced OperationCommands#set_vert_sync_widthSets the vertical sync width and saves it to the specied preset.Syntax#set_vert_sync_width pa
page | 3Page TitleIntroductionID Name Description1 HDMI Out Use an HDMI cable to connect a Hi-Def display to this HDMI port. 2 Up, Dn, Menu These push
page | 120Advanced OperationCommands#set_vert_totalSets the total number of vertical pixels and saves it to the specied preset.Syntax#set_vert_total
page | 121Advanced OperationCommands#set_vertical_mirrorEnables or disables vertical mirroring. When set to on, the output image is ipped vertically
page | 122Advanced OperationCommands#set_vertical_shiftAdjust the vertical position of the output image.Syntax#set_vertical_shift param1Parameterspara
page | 125VGA & Audio to HDMIScaler/Converter4 AppendixMenu System Summary ...
page | 126AppendixMenu System Summary640x480 60Hz720p 59.95Hz800x600 60Hz1680x1050 60Hz720p 30Hz1024x768 60Hz1920x1080 60Hz †720p 25Hz1280x768 60Hz192
page | 127Menu System SummaryAppendixRGB 4:4:4HDMIYCbCr 4:2:2Auto DetectOUTPUT COLORSPACEOUTPUT MODEBACKYCbCr 4:4:4DVI† Denotes output resolution that
page | 128AppendixMenu System Summary[0 ... 100][0 ... 100][0 ... 100][0 ... 100][0 ... 100]FullRed ChannelWarmOffLimitedGreen ChannelBlue ChannelNeut
page | 129Menu System SummaryAppendix[-50 ... 50][-100 ... 100][-100 ... 100][Auto, 1 ... 64]OnOn16:9OffOff4:3StretchSourceADJUSTMENTUNDER/OVER SCNASP
page | 4Connection Instructions ► Video1. Connect the included VGA cable from the video source (e.g. computer) to the VGA In port on the VGA & Au
page | 130AppendixMenu System Summary[Off, 5 ... 60]Display InfoDisplay InfoYesOnNoOffSYSTEMOSD TIMEOUTDISP. NOTIFYINPUT RES. INFOFIRMWARE VER.FACTORY
page | 131BACKAppendixMenu System SummaryTEST PATTERNSWhiteCrossHatchColor WV-RampOffGrayWindowH-RampWH-RampEXIT
page | 132Default SettingsAppendixSetting ValueAspect Ratio SourceBrightness 50Color Balance (Blue Channel) 50Color Balance (Green Channel) 50Color Ba
page | 133The Sender and Receiver units can be mounted on any at surface, as shown below (screws not included). There should be an inch or two of cl
page | 134SpecicationsAppendixConnectors, Controls, and IndicatorsVideo Input • 1 x VGA HD-15, femaleVideo Output • 1 x HDMI Type A 19-pin, femal
page | 135IndexAppendixAActive pixelshorizontal 95vertical 114Aspect ratio 28, 55, 85AudioInput 3BBack porchhorizontal 96vertical 115Brightness
page | 136AppendixIndexDDefault settings 132Display notify 37, 91EEdge enhance 25, 92FFactory reset. See Resetting the unitFeatures viFirmwaredisp
page | 137IndexSyncpolarityhorizontal 99vertical 118widthhorizontal 100vertical 119TTable of Contents viiiTechnical Support ivTest patterns 42,
20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] it. Switch it. S
VGA & Audio to HDMIScaler/Converter2 Basic OperationMenu System ...
page | 8Displaying the Menu SystemThe VGA & Audio to HDMI Scaler/Converter uses a built-in menu system to manage and control all video features.1.
page | 9Moving around within the Menu System1. There are six menu items within the main menu: Output Setup, Picture, Adjustment, System, Test Pattern
ii1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this product near water.6.
page | 105. To access the submenu for the highlighted item within the main menu, press the Menu button a second time. When a submenu is activated, a
page | 119. To exit the submenu and return to the main menu, use the Up or Dn button to highlight the <- Back option. 10. Press the Men
page | 12Output Resolution 1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Press the Menu button to
page | 138. After a few seconds, the input and output resolution information dialog will disappear.9. The Output Resolu. dialog is still displayed:
page | 14Output Color1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Press the Menu button to access th
page | 159. Press the Menu button to return to the Output Setup submenu. 10. Use the Up or Dn button to select the <- Back option.11.
page | 16Basic OperationBasic OperationMenu SystemOutput Mode1. Press the Menu button on the front panel. The Output Setup option will be highlighte
page | 17Basic OperationMenu System9. Press the Menu button to return to the Output Setup submenu. 10. Use the Up or Dn button to select t
page | 18Contrast1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highlight t
page | 19Brightness1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highlight
Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects and Gefen
page | 20GefenConverter----------------1.Output Setup2.Picture3.Adjustment4.System5.Test Patterns6.ExitContrastBrightnessSaturationHueColor RangeColor
page | 21Hue1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highlight the Pi
page | 22Basic OperationMenu SystemGefenConverter----------------1.Output Setup2.Picture3.Adjustment4.System5.Test Patterns6.ExitContrastBrightnessSat
page | 23Color Temperature1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to hi
page | 24Color Balance1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highli
page | 25Edge Enhance1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highlig
page | 26Basic OperationMenu SystemGefenConverter----------------1.Output Setup2.Picture3.Adjustment4.System5.Test Patterns6.ExitContrastBrightnessSat
page | 27Basic OperationMenu SystemUnderscan/Overscan1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Us
page | 28Aspect Ratio1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highlig
page | 29Horizontal Mirror1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to hi
ivTechnical Support(818) 772-9100 (800) 545-6900 8:00 AM to 5:00 PM Monday - Friday, Pacic TimeFax(818) [email protected]://www.
page | 30Basic OperationMenu System8. Press the Menu button to conrm the change and return to the Adjustment submenu.9. Use the Up or Dn button to
page | 31Vertical Mirror1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to high
page | 32Basic OperationMenu System8. Press the Menu button to conrm the change and return to the Adjustment submenu.9. Use the Up or Dn button to
page | 33Horizontal Shift1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to hig
page | 34Basic OperationBasic OperationMenu SystemVertical Shift1. Press the Menu button on the front panel. The Output Setup option will be highlig
page | 35Basic OperationMenu SystemPhase1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or D
page | 36OSD Timeout1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highligh
page | 37Display Notify1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highl
page | 388. Press the Menu button to conrm the change and return to the System submenu.9. Use the Up or Dn button to select the <- Back option.1
page | 39Input Resolution Information1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn b
v• Audio from the 2-channel analog input will be automatically embedded into the HDMI output signal.• By default, the current input and output resol
page | 40F/W Version1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highligh
page | 41Basic OperationMenu SystemGefenConverter----------------1.Output Setup2.Picture3.Adjustment4.System5.Test Patterns6.ExitOSD TimeoutDisplay No
page | 42Test Patterns1. Press the Menu button on the front panel. The Output Setup option will be highlighted.2. Use the Up or Dn button to highli
page | 43Basic OperationMenu System 6. Press the Menu button to return to the Test Patterns submenu and select a different pattern.7. To disable the
page | 44DIP Switch CongurationBasic OperationOn the bottom panel of the VGA & Audio to HDMI Scaler/Converter is a single DIP switch. Remove the
VGA & Audio to HDMIScaler/Converter3 Advanced OperationUSB Interface ...
page | 48USB InterfaceAdvanced OperationInstalling the Virtual COM PortIn order to control the VGA & Audio to HDMI Scaler/Converter using the foll
page | 49Advanced Operation6. The Computer Management window will open.7. In the left window pane, under System Tools, click Device Manager.8. In t
viFeatures and Packing ListFeatures• Converts and scales VGA and L/R analog audio to HDMI• Input resolutions up to 1920 x 1200 (WUXGA)• Output reso
page | 50CommandsCommand Description#factory_resetResets the unit to factory-default settings#fw_upgradeEnables the rmware upgrade mode#get_aspect_ra
page | 51CommandsCommand Description#set_color_balanceSets the color balance#set_color_rangeSet the output color range#set_color_tempSets the color te
page | 52CommandsAdvanced OperationUsing Preset ValuesWhen a command is entered, the VGA & Audio to HDMI Scaler/Converter will conrm the entry by
page | 53Commands#factory_resetResets the unit to factory-default settings.Syntax#factory_resetParametersNoneExample#factory_resetRESET TO FACTORY DEF
page | 54Commands#fw_upgradeEnables the rmware upgrade mode. We recommend that the Gefen Syner-G Software Suite be used to upgrade the rmware.Synta
page | 55Advanced OperationCommands#get_aspect_ratioDisplays the current aspect ratio setting.Syntax#get_aspect_ratioParametersNoneExample#get_aspect_
page | 56Advanced OperationCommands#get_brightnessDisplays the current brightness value.Syntax#get_brightnessParametersNoneExample#get_brightnessPICTU
page | 57Advanced OperationCommands#get_color_balanceDisplays the current color balance for the specied color channel. Syntax#get_color_balance param
page | 58Advanced OperationCommands#get_color_rangeDisplays the current color range setting.Syntax#get_color_rangeParametersNoneExample#get_color_rang
page | 59Advanced OperationCommands#get_color_tempDisplays the current color temperature setting.Syntax#get_color_tempParametersNoneExample#get_color_
page | 60Advanced OperationCommands#get_contrastDisplays the current contrast setting.Syntax#get_contrastParametersNoneExample#get_contrastPICTURE CON
page | 61Advanced OperationCommands#get_display_notifyDisplays the current display-notify setting. Refer to the #set_display_notify command for more
page | 62Advanced OperationCommands#get_edge_enhanceDisplays the current edge-enhance setting.Syntax#get_edge_enhanceParametersNoneExample#get_edge_en
page | 63Advanced OperationCommands#get_rmware_versionDisplays the current rmware version.Syntax#get_rmware_versionParametersNoneExample#get_rmwar
page | 64Advanced OperationCommands#get_horizontal_mirrorDisplays the horizontal mirror setting.Syntax#get_horizontal_mirrorParametersNoneExample#get_
page | 65#get_horizontal_shiftDisplays the current horizontal shift setting.Syntax#get_horizontal_shiftParametersNoneExample#get_horizontal_shiftHORIZ
page | 66Advanced OperationCommands#get_hueDisplays the current hue setting.Syntax#get_hueParametersNoneExample#get_huePICTURE HUE IS 50Related Comman
page | 67Advanced OperationCommands#get_input_resolutionDisplays the current input resolution.Syntax#get_input_resolutionParametersNoneExample#get_inp
page | 68Advanced OperationCommands#get_osd_timeoutDisplays the current OSD timeout value (in seconds).Syntax#get_osd_timeoutParametersNoneExample#get
page | 69Advanced OperationCommands#get_output_colorDisplays the current output color space.Syntax#get_output_colorParametersNoneExample#get_output_co
viiiTable of Contents1 Getting StartedIntroduction...
page | 70Advanced OperationCommands#get_output_modeDisplays the current output mode.Syntax#get_output_modeParametersNoneExample#get_output_modeOUTPUT
page | 71#get_output_resDisplays the current output resolution.Syntax#get_output_resParametersNoneExample#get_output_resOUTPUT RESOLUTION IS 1400x1050
page | 72#get_phaseDisplays the current phase setting.Syntax#get_phaseParametersNoneExample#get_phasePHASE IS 26Related Commands#get_video_settings#se
page | 73Advanced OperationCommands#get_picture_settingsDisplays the current picture settings. This command provides the same information as consecut
page | 74Advanced OperationCommands#get_saturationDisplays the current saturation value.Syntax#get_saturationParametersNoneExample#get_saturationPICTU
page | 75Advanced OperationCommands#get_sharpnessDisplays the current sharpness value.Syntax#get_sharpnessParametersNoneExample#get_sharpnessPICTURE S
page | 76Advanced OperationCommands#get_test_patternsDisplays the currently active test pattern.Syntax#get_test_patternsParametersNoneExample#get_test
page | 77Advanced OperationCommands#get_timing_presetDisplays the values for the specied timing preset.Syntax#get_timing_presetParametersparam1 P
page | 78Advanced OperationCommands#get_uo_scanDisplays the current underscan or overscan value.Syntax#get_uo_scanParametersNoneExample#get_uo_scanUND
page | 79Advanced OperationCommands#get_vertical_mirrorDisplays the current vertical mirror value.Syntax#get_vertical_mirrorParametersNoneExample#get_
ixTable of Contents3 Advanced OperationUSB Interface ...
page | 80Advanced OperationCommands#get_vertical_shiftDisplays the current vertical shift value.Syntax#get_vertical_shiftParametersNoneExample#get_ver
page | 81Advanced OperationCommands#get_video_outputDisplays the current video output settings. This command produces the same output as consecutivel
page | 82Advanced OperationCommands#get_video_settingsDisplays the current video settings. This command provides the same information as consecutivel
page | 83Advanced OperationCommands#helpDisplays help on a specic command. If no command is specied (param1), then a list of all available commands
page | 84Advanced OperationCommands#rebootReboots the unit.Syntax#rebootParametersNoneExample#rebootUNIT WILL REBOOT SHORTLYRelated Commands#factory_r
page | 85Advanced OperationCommands#set_aspect_ratioSets the aspect ratio of the output video signal. The default setting is 0.Syntax#set_aspect_rati
page | 86Advanced OperationCommands#set_brightnessSets the brightness of the output video signal. The default setting is 50.Syntax#set_brightness par
page | 87Advanced OperationCommands#set_color_balanceSets the color balance of the output video signal.Syntax#set_color_balance param1 param2Parameter
page | 88Advanced OperationCommands#set_color_rangeSets the color range of the output video signal.Syntax#set_color_range param1Parametersparam1 C
page | 89Advanced OperationCommands#set_color_tempSets the color temperature of the output video signal.Syntax#set_color_temp param1Parametersparam1
Comments to this Manuals