®3GSDI to HDMI® 1.3 ConverterEXT-3GSDI-2-HDMI1.3User Manualwww.gefen.com
71 SDI Input Color Sampling LED IndicatorThis LED indicator will relay the status of the incoming SDI input’s color sampling. Options are either 4:4:
8How to Connect the 3GSDI to HDMI 1.3 Converter1. Connect the SDI source (SD/HD/3G) to the SDI input on the 3GSDI to HDMI 1.3 Converter using a user
9DIP SWITCH FEATURESThe 3GSDI to HDMI 1.3 Converter has a series of DIP switches that will allow manual confi guration of the HDMI’s output video signa
10DIP SWITCH FEATURES3 When the EDID switch is ON (set to manual), this switch sets the output sampling of the video: 4:2:2 or 4:4:4.4 When the EDID
FIRMWARE UPDATEThings you’ll need:• Computer running Windows XP or Vista• 3GSDI Converter Firmware Loader 1.1.18 software • USB cable (to-male)• Fi
FIRMWARE UPDATE3. Download and decompress 3GSDI to HDMI Converter Firmware 1.1.5 from http://www.gefen.com/kvm/support/download.jsp to the ne
FIRMWARE UPDATE137. After pressing Update Device, you should see this window confi rming the correct COM port, the detected device, a
FIRMWARE UPDATE9. If all steps are PASS, the fi rmware upload process can continue. Click YES to continue the update. If there is a FAIL, repeat ste
16Max. image output resolutions: ...2K (2048x1080), 1920x1080/60Input Connector: ...(
17WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects
ASKING FOR ASSISTANCERev B8Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM
20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] B8This product uses
CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Bottom Panel Layout7 Bottom Panel Descriptions8 Connecting And
1Congratulations on your purchase of the 3GSDI to HDMI 1.3 Converter. Your complete satisfaction is very important to us.GefenGefen delivers innovativ
2READ THESE NOTES BEFORE INSTALLING OROPERATING THE 3GSDI TO HDMI 1.3 CONVERTER• Supports the following SMPTE standards: 259M, 292M, SMPTE 274M, SMPT
3Features• Field upgradable fi rmware using the built-in USB port.• Supports a test pattern at 720P/60 without needing a valid source signal• HMDI 1.
4Back Panel4 5 6 7 8 91 2 3Front PanelPANEL LAYOUT
51 Video Lock LED IndicatorThis indicator will become active when the SDI input (SD/HD/3G) is locked.2 3G LED IndicatorThis indicator will become ac
6Bottom Panel456712 3BOTTOM PANEL LAYOUT
Comments to this Manuals