Gefen EXT-HDMI-5BNC User Manual download pdf (Page 10)

Locking 5V DC Power Supply Input1

When using a 5 BNC cable system this connector will not need to be used.

When using a 4 BNC cable system a second 5V DC power supply (part# EXT-

PS52AU) must be purchased and connected to this input port.

IR Receiver2

This receiver is used for the IR Repeater feature. This receiver will accept

standard IR remote commands for transmission back to the sending unit and

then to the connected IR emitter/blaster.

HDMI Output Port3

Connect the HDMI capable display device to this output port. A secure

connection to this HDMI port can be made using Gefen Mono•LOK cables.

IR Extension Port4

An IR receiver extension (sold separately, part# EXT-RMT-EXTIR) can be

connected to this port to relocate the IR receiver. This option is available so that

the receiving unit can be placed out-of-sight while still retaining the usability of

the IR Repeating feature.

Link LED Indicator5

This LED indicator will become active once a valid link has been established

between the sending and receiving units. If this LED does not activate there is a

possible mis-connection between the two units.

Red BNC Connector6

This connector will transmit the RED signal data to the receiving unit. The cable

used for this connection cannot be omitted.

Green BNC Connector7

This connector will transmit the GREEN signal data to the receiving unit. The

cable used for this connection cannot be omitted.

Blue BNC Connector8

This connector will transmit the Blue signal data to the receiving unit. The cable

used for this connection cannot be omitted.

Clock BNC Connector9

This connector will transmit the CLOCK signal data to the receiving unit. The

cable used for this connection cannot be omitted.

Receiver Power BNC Connector10

This connector will transmit the power needed to operate the receiving unit. The

cable used for this connection can be omitted when using a 4 BNC type of cable

setup. If this cable is omitted power must separately be supplied to the receiver

by one of the included 5V DC power adapters.

RECEIVER PANEL DESCRIPTIONS

1 2 ... 5 6 7 8 9 10 11 12

No comments

Gefen EXT-HDMI-5BNC User Manual Page 10