®DVI Over One CAT6 ExtenderEXT-DVI-1CAT6User Manualwww.gefen.com
71 Equalization Adjustment (Trim Pot Control) The EQ adjustment or Trim Pot is used to equalize the signal to compensate for the extension distanc
8How to Connect the DVI over one CAT6 Extender1. Connect a DVI-D cable (one is supplied) between the DVI output on a source device and the DVI input
9CONNECTING AND OPERATING THEDVI OVER ONE CAT-6 EXTENDERAdjusting the Signal QualityThe DVI over one CAT6 receiver unit has a equalization device call
10DIP SWITCH CONFIGURATIONNOTE: DIP switch 3 and DIP switch 4 are not used.Default settings for DIP switchesDIP Switch Position1ON2 OFF3 OFF (Not Used
11DIP SWITCH CONFIGURATIONDIP Switch SettingsDIP 1 - EDID Management• OFF - Local EDIDWhen Local EDID mode is used, the EDID will be assembled by cop
12345678Gefen has specifi cally engineered products to work with the TIA/EIA-568-B specifi cation. Please follow the table below when fi eld terminating
13Maximum Pixel Clock ... 225 MHzMaximum Video Resolution ...
14WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects
Rev A920600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected]
Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM (PST) Monday thru Friday P
CONTENTS1 Introduction2 Operation Notes3 Features4 Sender Panel Layout5 Sender Panel Descriptions6 Receiver Panel Layout7 Receiver Panel Descripti
1Congratulations on your purchase of the DVI over one CAT6 Extender. Your complete satisfaction is very important to us.GefenGefen delivers innovative
READ THESE NOTES BEFORE INSTALLING OROPERATING THE DVI OVER ONE CAT6 EXTENDER• The DVI over one CAT6 Extender was designed for use with high quality
3Features• Flexible extension of single-link DVI-D thanks to inexpensive and widely-available CAT6 cable• Video is transmitted digitally over the CA
4Front PanelBack PanelSENDER PANEL LAYOUT4123
51 5V DC Power ReceptacleConnect the included 5V DC power supply between this input and an open wall power socket.2 Power LED IndicatorThis LED will
6Front PanelBack PanelRECEIVER PANEL LAYOUT45132
Comments to this Manuals