Gefen EXT-HDMI-241N User Manual

HDMI SwitcherUSER MANUALwww.gefen.com®EXT-HDMI-241N

IR EXTENDER INSTALLATIONHow to Connect the IR Extender1 Plug the IR extender into the Remote port on the front of the Switcher Unit2 Flip the Dip Sw

SPECIFICATIONS8Video Amplifi er Bandwidth ... 165 MHz Input Video Signal ...

9

Rev X120600 Nordhoff St, Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected]

Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM Monday through Friday PSTW

TABLE OF CONTENTSIntroductionFeaturesPanel DescriptionsConnecting and Operating the HDMI SwitcherRMT2-IR InstallationIR Confl ict CodesIR Extender Inst

Congratulations on your purchase of the Gefen HDMI Switcher. Your complete satis-faction is very important to us.About GefenGefen’s line of HDMI switc

FEATURESFeatures• Switches easily between any two HDMI sources• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions• Extends any HDMI co

PANEL DESCRIPTIONS3Connects to IRextender IR eyeIndicates if port 1 or port 2 is selectedSelects port 1 or port 2Connects to 5VDC power supplyHDMI In

CONNECTING AND OPERATING THE HDMI SWITCHERHow to Connect the HDMI Switcher to your devices1 Connect the supplied HDMI to HDMI cables from the HDMI so

RMT2-IR INSTALLATION1. Remove battery cover from the back of the RMT2-IR remote.2. Verify that dip switches 1 & 2 are in the down (OFF) position.3

IR CODE CONFLICTSHow to Resolve IR Code Confl ictsThere are matching pairs of dip switches underneath the Switcher unit (outlined below) and under the