Gefen GTV-WVGA-LR User Manual download pdf (Page 13)

How to Setup the Wireless VGA LR Sender Unit

1. Connect source devices to the Wireless VGA LR sender unit. The sender

unit has the following connection options:

VGA

Component

S-Video

Composite

2. Connect a single analog audio source to the Wireless VGA LR sender unit

using a 3.5mm mini-jack audio cable.

3. Connect one or both of the following output device types to the Wireless

VGA LR receiver unit:

VGA (VGA cable included)

Component

4. Connect a single analog audio output device to the 3.5mm mini-jack output

on the Wireless VGA LR receiver unit.

5. Connect the included 12V DC power supplies to both the Wireless VGA LR

sender and receiver units.

6. Toggle the power switch on both the Wireless VGA LR sender and receiver

units.

7. Turn on all output and source devices.

How to Operate the Wireless VGA LR

Once all units, sources, and output devices are powered and turned on, the

sending and receiving units will begin their boot-up sequence.

During this sequence all channel LEDs (blue) on the sender and receiver units

will turn on and remain on. The output will display a blue screen with the text:

“Wi-Fi initial...”

Once the initial boot-up sequence is complete, the currently selected input (on

the sender) and output (on the receiver) will be active (blue). The LED for the

channel in operation will also be on (blue). The output will display a blue screen

with the text:

“Search channel XX” (where XX is the current channel)

During the ﬁ nal stages of the boot-up sequence, the Wi-Fi LED should turn on

(green) while the sender and receiver units attempt to establish contact with each

other.

Once a link has been established, the Wi-Fi LED will begin to blink rapidly. This

will indicate that data is being transmitted from the sender to the receiver unit.

Video should now be output through the Wireless VGA LR receiver unit.

CONNECTING AND OPERATING THE WIRELESS VGA LR

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

Gefen GTV-WVGA-LR User Manual Page 13