Gefen HDMI to Composite Scaler User Manual download pdf (Page 8)

1 Stereo Analog Audio Output

2 RCA stereo analog audio outputs. Connects to the display or a audio

Receiver. Only 2 channel LPCM from the HDMI input can be passed to these

outputs. Multi-channel bit-stream such as Dolby Digital will not be passed to this

output.

2 Composite Analog Video Output

RCA composite video output. Connect to a composite input on a television. 480i

and 576i are the only resolution output options.

3 S-Video Analog Video Output

S-Video video output. Connect to a s-video input on a television. 480i and 576i

are the only resolution output options.

4 Digital Audio Output

Coaxial digital audio output. Connects to the display or a audio Receiver. 2

channel LPCM and multi-channel bitstream can be output from this connector.

5 Video Format Output Switch

Switch between NTSC (60Hz) and PAL (50Hz) output. Please ensure that you

use the proper output for you television. Using the wrong format will result in a

unrecognizable picture and may damage your television.

6 Under/Over Scan Switch

Most analog television sets were designed to accept an over-scanned signal.

If the resulting video signal displays a black border around the edges, use

the over-scan option. If the resulting video signal is stretched far beyond the

television’s edge, use the under-scan option.

7 HDMI Input

Connect the HDMI source to this input connector. This will accept both video

and audio through the HDMI connector.

8 5V DC Power Supply Input

Connect the included 5V DC power supply to this input.

9 Power LED

This LED will become active once the included power supply is properly

connected.

PANEL DESCRIPTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Gefen HDMI to Composite Scaler User Manual Page 8