Gefen GTV-AUDDEC User Manual download pdf (Page 8)

1 Power Status LED Indicator

This LED will indicate the current power state. When the LED is red, the unit is

in standby mode. When the LED is green, the unit is on.

2 Infrared (IR) Receiver

This IR receiver will accept commands from the included GTV-AUD-IR remote

control. This receiver requires line-of-sight between the unit and remote for

proper operation.

3 Mute / Right Button

This button will cycle between Mute-On and Mute-Off modes when not in the

Menu System. When the Mute-On mode is enabled, all audio output will be

ceased. While in the Menu System this button will cycle through available

options in the right direction when a feature has been selected for adjustment.

4 Input / Left Button

This button will toggle between the HDMI and Coaxial audio input sources

when not in the Menu System. When the HDMI source is selected, audio will

be extracted from the embedded audio within the incoming HDMI signal. When

the Coaxial source is selected, audio will be extracted from the incoming audio

source connected to the Coaxial (S/PDIF) input port. While in the Menu System

this button will cycle through available options in the left direction when a feature

has been selected for adjustment.

5 Volume Decrease / Down Button

This button is used to decrease the volume level of the audio outputs when

not in the Menu System. While in the Menu System this button will cycle down

through the current level’s options.

6 Volume Increase / Up Button

This button is used to increase the volume level of the audio outputs when not

in the Menu System. While in the Menu System this button will cycle up through

the current level’s options.

7 Main LCD Display

This display will show pertinent status information and will be used to make

adjustments to features in the Menu System.

8 Menu Button

This button will activate the Menu System which is where all adjustment and

settings will be made.

9 Mode / OK Button

This button will change the Processing Mode when not in the Menu System.

While in the Menu System this will be used as a conﬁ rmation button.

10 Exit Button

This button is used to exit the current menu level and return to the previous/

parent level. This button will exit the entire Menu System when on the top most

level.

11 Power Button

This button will toggle between the ON and STANDBY power states. An LED

status indicator will signify the current power state. A RED LED will be active

when the unit is in Standby power state. A GREEN LED will be active when the

unit is in the ON power state.

PANEL DESCRIPTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

Comments to this Manuals

No comments

Gefen GTV-AUDDEC User Manual Page 8

Comments to this Manuals

Related products and manuals for Decoders Gefen GTV-AUDDEC