Gefen GTB-3DTV-KVM User Manual download pdf (Page 11)

CONNECTING THE

KVM ELR EXTENDER FOR HDMI 3DTV

How to Connect the KVM ELR Extender for HDMI 3DTV

1. Connect the Hi-Def source to the Sender Unit using the included HDMI cable.

2. Use an HDMI cable to connect the Receiver Unit to an HDTV display.

3. Connect the USB host device to the Sender Unit.

4. Connect up to two (2) USB devices to the Receiver Unit.

5. Connect a CAT-5e or CAT-6 cable between the Link port on the Sender Unit

and the Link port on the Receiver Unit.

6. Connect another CAT-5e or CAT-6 cable between the USB Link port on the

Sender Unit and the USB Link port on the Receiver Unit.

NOTE: If terminating network cables in the ﬁ eld, please adhere to the TIA/

EIA568B speciﬁ cation (see page 11).

6. Connect the 5 V DC locking power supplies to the Sender Unit and Receiver

Unit. Do not overtighten the locking connectors. Plug the two (2) AC power

cords from the power supplies to available electrical outlets.

Wiring Diagram for the KVM ELR Extender for HDMI 3DTV

GTB-3DTV-KVM

CAT-5 LINK CABLE

(Up to 330 ft)

HDMI CABLE

Sender

Receiver

Sender

USB CABLE

HDMI Display

Home Theater

Multimedia PC

USB Printer

Attention: This product should always be connected to a grounded

electrical socket.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Gefen GTB-3DTV-KVM User Manual Page 11