Gefen EXT-HDMI1.3-1FO User Manual

®Extender for HDMI® 1.3 overOne Fiber with IREXT-HDMI1.3-1FOUser Manualwww.gefen.com

7RECEIVER UNIT DESCRIPTIONS1 RS-232 Output PortConnect a controlling device to this port. 2 Locking HDMI Output PortConnect a HDTV display to this H

8EXT-HDMI1.3-1FOSC-SC FIBER OPTIC CABLE (Up to 1,000 ft)SenderHDMI SourceReceiverHD DisplayHDMI CABLEHow to Connect the Extender for HDMI 1.3 over One

DIP SWITCH CONFIGURATION9DIP SwitchesOn the bottom of the Sender Unit and Receiver Unit are a bank of four (4) DIP switches. These DIP switches provi

10DIP SWITCH CONFIGURATIONDIP 1 - EDID Mode• OFF - Local EDIDWhen Local EDID mode is used, the EDID will be assembled by copying all video and audio

11DIP SWITCH CONFIGURATIONCalibrating the Sender Unit and Receiver UnitIMPORTANT: Before beginning the calibration process, make sure that the Sender

12SPECIFICATIONSVideo Amplifi er Bandwidth ... 225 MHzMaximum Resolutions Supporte

WARRANTY13Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] A5This product uses UL

ASKING FOR ASSISTANCETechnical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM Monda

CONTENTS1 Introduction2 Operation Notes3 Features4 Sender Unit Layout5 Sender Unit Descriptions6 Receiver Unit Layout7 Receiver Unit Descripti

1INTRODUCTIONCongratulations on your purchase of the Extender for HDMI 1.3 Over One Fiber with IR. Your complete satisfaction is very important to us.

2OPERATION NOTESREAD THESE NOTES BEFORE INSTALLING OROPERATING THE EXTENDER FOR HDMI 1.3 OVER ONE FIBER WITH IR• IR data repeater functionality is si

3FEATURESHDMI 1.3 Features• 225 MHz (up to 12 bit YUV 444 @ 1080p)• Deep Color• Dolby TrueHD and DTS-HD Master Audio• Lip-Sync• CEC Protocol Pass-T

4SENDER UNIT LAYOUTFrontBack3456712

5SENDER UNIT DESCRIPTIONS1 Power IndicatorThis two-color LED will turn bright red once the included 5V DC locking power supply has been properly conne

6Front BackRECEIVER UNIT LAYOUT34512867